Ceiling Mounted ESP Mist Collector - SmogHog SHN series - Mist and Fume Collection Systems

SmogHog Mist Collection

SmogHog
SHN Series

Compact ceiling-mounted electrostatic precipitator (ESP) mist collector for water and oil-based coolants — 1,000 to 5,200 CFM, expanded cabinet design with standard aluminum mesh prefilter, and slide-in/slide-out filters and ESP cells for fast manual cleaning.

SmogHog SHN Ceiling-Mount ESP Mist Collector

Features & Benefits

The smaller sibling to the SGN — same two-stage Penney-type electrostatic precipitator architecture, scaled down for 1,000 to 5,200 CFM applications. The expanded SHN cabinet design now comes standard with a 1-inch heavy-duty aluminum mesh and coalescing pad prefilter, which catches mist and smoke particles before they reach the ionizer and ESP cell — extending cleaning intervals by 2 to 3 times. Filters and ESP cells slide in and out of the system for fast manual cleaning, and a 115V single-phase voltage option is available for shops without three-phase power.

97%

Capture at 0.3 µm

5,200

Max CFM

2-3×

Longer Service Intervals

Two-stage ESP design: ionizer section charges particles, collection cell strips them from the airstream
Captures water-based and oil-based coolants, oil smoke, mist, and submicron particles
Expanded cabinet design includes 1-inch aluminum mesh and coalescing pad prefilter as standard
Optional 2-inch Mist-Stop filter fits inside the cabinet without an inlet plenum
Filters and ESP components slide in and out for fast manual cleaning
Multi-pass ESP cell configurations available for heavy-duty applications
Ducted, unducted, wall-mounted, or ceiling-mounted installation options
Left-to-right and right-to-left airflow configurations
Multiple voltage options: 115, 208, 230, 460, or 575V
Optional 95% DOP or HEPA after-filters for heavy-duty or critical applications
Continuous airflow — ESP cells don't plug or restrict flow over time like media filters
Washable, reusable collection cells eliminate filter replacement and disposal costs
HVRS power pack supplies up to 12 kVDC ionization, 6 kVDC collection
Integral sump and drain connection for collected liquid runoff
Optional accessories: drain bottle, drain loop trap, dual polarity, mist-stop or oil impingement prefilter, motor starter, odor control modules, inlet/outlet plenums
Suitable for brazing, casting, flame cutting, drilling, grinding, milling, screw machining

Available Sizes

Two model sizes covering airflow from 1,000 to 5,200 CFM. Choose SHN-10 for compact source-capture applications and SHN-20 for larger ambient air cleaning or higher source-capture demand.

SHN-10

1,000 – 1,250 CFM

0.5 HP Motor

SHN-20

2,000 – 5,200 CFM

1.0 – 2.0 HP Motor

Specifications

Brand

Parker SmogHog

Series

SHN

Filter Technology

Two-Stage Electrostatic Precipitator

Mounting

Ceiling, Wall, or Above-Floor

Airflow Range

1,000 – 5,200 CFM

Capture Efficiency

Over 97% at 0.3 µm

Application

Mist, Smoke, Wet Particulate

Coolants Compatible

Water & Oil-Based

Standard Prefilter

1 in Aluminum Mesh

Voltage Options

115V/1Ph, 208V, 230V, 460V, 575V

Power Pack Output

12 kVDC Ionizer / 6 kVDC Collector

Cell Configurations

Single or Multi-Pass

Filter Access

Slide-In / Slide-Out

After-Filter Options

95% DOP or HEPA

Get Started

Need help selecting the right SHN configuration for your facility? Send us your coolant type, target CFM, mounting environment, and any prefilter or after-filter requirements. SHN is engineered to order with multiple inlet, outlet, voltage, and accessory options.

Brochure