Portable - SmogHog PCN series - Mist and Fume Collection Systems

SmogHog Mist Collection

SmogHog
PCN Series

Mobile electrostatic precipitator (ESP) fume and mist collector — wheels right up to welding stations, soldering benches, and grinding work for source-capture extraction. Includes a 7 to 12 ft swing arm with bell-mouth hood and washable ESP collection cells that hold over a pound of contaminants per cleaning cycle.

SmogHog PCN Mobile ESP with XA Swing Arm at Welding Station

Features & Benefits

A self-contained portable ESP fume and mist collector built specifically for source-capture extraction at welding, soldering, brazing, and grinding workstations. Wheels and a 7 to 12 ft swing arm with a bell-mouth capture hood let one operator move the unit anywhere it's needed and pull contaminants out at the emission point — before they reach the breathing zone or settle on equipment. The same Penney-type two-stage ESP technology used in the SmogHog ceiling-mount product line, packaged into a 1,000 CFM mobile cabinet.

95%+

Capture Efficiency

12 ft

Swing Arm Reach

1,000

CFM Source Capture

Mobile electrostatic precipitator (ESP) for source-capture of welding fume, oily smoke, and light mist
Two-stage Penney-type ESP — ionizer charges particles, collection cell strips them from the airstream
Pulls contaminants out at the emission point before they reach the operator's breathing zone
Wheeled cabinet rolls easily between workstations on demand
Two 8-inch fixed wheels and two 5-inch locking swivel-caster hard rubber wheels
Compact 47-3/4 H × 27 W × 40 L inch cabinet fits in tight industrial spaces
XA swing arm with approximately 7 to 12 ft of horizontal or vertical reach
Bell-mouth capture hood for powerful, precise extraction at the source
1 HP, 230/460V/3-Phase totally enclosed motor — also available in 115V/1-Phase
Power pack mounted inside the cabinet, out of the airstream — protected from contamination
Cabinet-mounted indicator light displays component operating condition
Energy-limiting power pack (UL Recognized / CSA Certified): up to 12 kVDC ionizer / 6 kVDC collector
Aluminum prefilter and ESP collection cell are reusable and easy to clean
Each cell holds over one pound of contaminants before requiring cleaning, minimizing downtime
No costly disposable filters — washable cells eliminate replacement and disposal costs
Continuous airflow — ESP cells don't plug or restrict flow over time like media filters
Low sound levels eliminate the need for expensive silencers

Applications

Designed for source-capture in metalworking and fabrication processes that generate fume, smoke, or light mist at a single workstation:

Welding

Soldering

Brazing

Grinding

Cutting

Plasma Cutting

Light Mist

Oily Smoke

Metal Oxide Fume

Specifications

Brand

Parker SmogHog

Series

PCN

Filter Technology

Two-Stage Penney-Type ESP

Configuration

Mobile, Wheeled, Self-Contained

Airflow

1,000 CFM

Capture Efficiency

Over 95% on Mist, Smoke, Fume

Cabinet Dimensions

47.75 H × 27 W × 40 L in

Motor

1 HP, TEFC

Voltage Options

115V/1Ph or 230/460V/3Ph

Power Pack Output

12 kVDC Ionizer / 6 kVDC Collector

Power Pack

UL Recognized / CSA Certified

Inlet

8 in

Wheels

2× 8 in Fixed + 2× 5 in Locking Swivel

Swing Arm Reach

7 – 12 ft Horizontal or Vertical

Capture Hood

Bell-Mouth, XA Compatible

Cell Capacity

Over 1 lb Contaminants

Get Started

Need help selecting the right PCN configuration and arm length for your workstation? Send us your application, contaminant type, voltage requirements, and arm reach needs for a sizing recommendation.

Brochure