Phase-LOK S - JS Series Liquid Separator Elements

Features & Benefits

Silicone impregnated cellulose media creates hydrophobic surface that repels water
Allows hydrocarbons to pass through while rejecting water carryover from coalescing phase
Pleated design provides high surface area for effective liquid-liquid separation
Rarely fouls with solids due to filtration level achieved in upstream coalescer stage
Extended service life - typically replaced only every 2nd or 3rd coalescer change
Maximum service life of one year under normal operating conditions
Operating temperature up to 300°F (149°C) for elevated temperature service
Low initial differential pressure (<1 PSID) for minimal flow restriction
90% efficiency at 5 micron for particulate removal
Available in multiple lengths from 11.25" to 28.25" to fit standard housing configurations

Series	Phase-LOK S - JS Series
Filter Type	Pleated Silicone Impregnated Cellulose Liquid Separator Element
Media	Silicone Impregnated Cellulose (Hydrophobic)
Micron Rating	90% @ 5 micron
Outside Diameter	6"
Inside Diameter	3.5"
Lengths Available	JS-11: 11.25", JS-13: 14.5", JS-15: 16.5", JS-16: 14.25", JS-18: 28.25", JS-22: 22.25"
Maximum Temperature	300°F (149°C)
pH Range	5 - 9
Clean Differential Pressure	<1 PSID
Final Differential Pressure	8 PSID
Collapse Differential Pressure	75 PSID
Metal Components	Plated Carbon Steel
Gasket Options	Buna-N, EPR, Viton
End Cap Configurations	DOE (standard), Threaded Base (TB) option
Applications	Post-Coalescer Water Separation, Fuel Purification, Hydrocarbon Dewatering, Produced Water Treatment, Liquid-Liquid Phase Separation

We can't find products matching the selection.